| This 8 Bay SCA RAID
solution is complete with 8 sets of RDHSDE100 Kingston SCA Hot-Swap kits to
house 8 units of 3.5" SCA 80-pin hard drives. The RDSS421B rack mount
chassis in rugged steel, is designed to reliably house up to eight
5.25" devices. Solution is complete with internal U160 Amphenol
cabling/AMP heads, and rear panel connections. Providing a maximum in
excess of a terra-byte of storage.
Chassis Features:
- Standard Rack Mount
Design: 7" (4U) x 19" x 20.1".
- Rear Panel Supports up
to eight I/Os.
- Rugged Steel
Construction. Provides a durable enclosure with superior heat
dissipation.
- Houses Almost any 3.5
inch and 5.25 inch SCSI Devices. Standard size storage bay(s) house
tape, floppy, DVD, ZIP and hard drives, or RAID controllers.
- Two 300/400Watt* Power
Supplies. Enhanced, auto-ranging load-sharing, hot swappable power
supplies. (*This value represents the continuous, "rated"
wattage for the power supply. This power supply is capable of
providing a "peak" wattage of 500 watts during spin-up of
high performance drives.
- Four highly-rated, fans
provide excellent cooling for long hours of operation.
- Front Panel Display.
Front panel indicators display important operating conditions such as
power on/off, HDD active.
SCA Hot-Swap Kit:
Uses 8 sets of RDHSDE100
Kingston 80-pin SCA hot-swap carriers, 10K/15K U160 supported., with 8
ball-bearing independent intake fans, a total of 8 SCA U160 80pin Hard
drives. Hard drives vary from 9GB to 181GB, with a maximum in excess of a terra-byte
of storage.
Others:
- Custom Amphenol internal
SCSI cabling with AMP dual input heads, for redundant daisy-chaining
and dual termination points for redundant termination.
- Dual Belkin U160
external terminators for fault resilience, so that if one terminator
fails the other will automatically provide the failed-over multimode
signal.
- External U160 6' cable
for connecting sub-storage to your server's RAID
controller....(optional dual inputs).
|